Fire Skid Units for UTV and ATV
With Warrior Brush Trucks, you can transform a typical pickup truck, ATV or UTV into a fully-equipped firefighting apparatus. Moreover, you can easily restore the vehicle’s original functionality by removing the fire skid unit whenever necessary, granting you unparalleled flexibility.
50 Gallon UTV PCO Fire Skid Unit
Standard Specifications
- All aluminum frame
- 50 Gallon water tank with easy fill
- Manual Hannay hose reel with hand crank
- 75’ of 3/4” red rubber hose with fog nozzle
- CET Mini pump with 2.5hp 4-stroke Honda
- Chemical resistant polyethylene tank with 5 year UV rating
- Factory tested with OEM parts registration
50 Gallon Aluminum UTV Skid Unit for Forestry Fire Suppression
Standard Specifications
- All-aluminum frame
- 50 Gallon aluminum tank with easy-fill
- Manual Hannay hose reel with hand crank
- 75’ of 3/4” red rubber hose
- CET Mini pump with 2.5hp 4-stroke Honda
- (2) Aluminum drip torch holders
- 12 Gallon fuel tank with hose and nozzle
- Water cooler holder
- Aluminum lockbox and storage with gear rack
Options
- Brass or stainless steel fittings and valves
- Electric Hannay hose reel
- Custom configurations to allow for larger water capacity
50-100 Gallon Fire Skid Units for UTV – Poly or Aluminum
Used for Wildland Fire Rescue
Standard Specifications
- 50 Gallon water tank w/ tank level sight tube
- Complete poly welded construction
- Manual Hannay hose reel with hand crank, 1” x 50’ hose
- CET Dual Stage Pump
- 5.5 hp manual start Honda engine, 39-90 PSI, 20-95 GPM
- 1” NHT discharge w/ full port brass ball valve, cap, and chain
- 1-1/2” NHT discharge w/ full port brass ball vale, cap, and chain
- 1” discharge to hose reel w/ full port brass ball valve
- 1” recirculate w/ full port brass valve
- 1-1/2” tank to pump suction
Options
- 70 Gallon water capacity
- 100 Gallon water capacity
- CET Dual Stage Electric Start Pump
- 1” x 50’ NFPA booster hose
- 1” x 100’ NFPA booster hose
- Hannay electric rewind hose reel
100-500 Gallon Poly Wildland Pickup-Flatbed Skid
Standard Specifications
- 100 gallon water tank w/ tank level sight tube
- Complete poly-welded construction
- Electric Hannay hose reel, 1” x 100’ hose
- CET dual Stage electric start pump
- 5.5 hp electric start Honda engine, 48-120 PSI, 20-65 GPM
- 1” NHT discharge w/ full port brass ball valve, cap, and chain
- 1-1/2” NHT discharge w/ full port brass ball vale, cap, and chain
- 1” discharge to hose reel w/ full port brass ball valve
- 1” recirculate w/ full brass port valve, 1-1/2” tank to pump suction
Options
- 200, 300, 400, and 500 gallon tanks
- Built-in foam cell
- CET PFP-20 pump w/ 20 HP Honda w/ control panel and primer
- 1” x 100’ NFPA booster hose, 800 PSI
- Scotty 4171 foam system
- Custom stainless discharge manifold
WE BUILD WARRIORS.
Made in the U.S.A.
Engineered tough. Built to last. Mission ready.
At Warrior Brush Trucks, we take pride in engineering top-performing fire trucks that are built to withstand the rigors of emergency situations. Our team of dedicated wildland professionals and engineers work tirelessly to manufacture each truck from the ground up, ensuring that every aspect of the vehicle is optimized for peak performance.
While anyone can build a brush truck, no one does it quite like Warrior. We understand that the equipment we produce can mean the difference between life and death in high-pressure situations, and we take that responsibility very seriously. When you purchase a Warrior Brush Truck, you can trust that you’re getting a professionally engineered apparatus that is more than capable of handling any emergency situation that comes your way.
Ultimately, choosing Warrior Brush Trucks is the smartest decision your agency can make when it comes to protecting your community. Don’t settle for anything less than the best – trust Warrior to deliver the performance, durability, and reliability you need to keep your firefighters & community safe.
